The Scotch-Brite clean and strip XT disc is a long-lasting surface conditioning disc designed to remove coatings, rust and weld discoloration. It combines extra coarse (XCS) silicon carbide mineral with open web, so the disc can aggressively clean without significantly altering the base material. To engineer Scotch-Brite clean and strip XT disc 3M combined extra coarse silicon carbide mineral and non-woven nylon fibers using resin. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. Altogether, this surface conditioning disc delivers a sharp, consistent cut without gouging or marring the workpiece. The resin bond strengthens the disc and breaks down gradually to reveal new fibers and sharp mineral, so you get a consistent cut over the life of the abrasive. Moreover, gaps in the nylon fibers permit air flow, which may reduce the risk of heating or warping the substrate. The sharp-cutting mineral and responsive open web make this abrasive well suited for projects like coating, sealant and rust removal and weld cleaning. Additionally, it is a good paint removing disc. Non-woven technology makes Scotch-Brite industrial abrasives unique. A combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life. Scotch-Brite products not only enhance productivity, but also increase operator safety by reducing the need for cleaning chemicals and pastes and replacing wire brushes that can break off and cause injury. From aesthetic finishing to weld blending, deburring and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.
Scotch-Brite Non-Woven Clean and Strip XT Disc, 4-1/2 in Diameter Disc, Extra Coarse Grade, Silicon Carbide Abrasive, 13300 rpm Maximum
Features
- Aggressively removes paint, rust and coatings
- Load-resistant material resists clogging for consistent cutting action
- Smear-resistant properties avoid extra cleaning of the work surface
- Extra coarse-grade silicon carbide provides aggressive cutting and leaves a fine finish
- Springy, non-woven fibers respond to contours, helping to maintain part geometry
- Scotch-Brite clean and strip XT disc is tougher and more durable than standard Scotch-Brite clean and strip disc
ApplicationGrinding and Surface Preparation
Certification/StandardsOSHA 29 CFR 1910.1200|TSCA Listed
Manufacturer: 3M
Brand: 3M
Country of Orgin: US
UPC: 048 011331942
UNSPSC: 31191509
Other Part Numbers: 33194 ; 7000121057 ; 048011331942 ; 04801133194 ; 48011331942 ; 00048011331942
Keywords
Scotch-Brite 048011-33194 Non-Woven Clean and Strip XT Disc, 4-1/2 in Dia, Extra Coarse Grade, Silicon Carbide Abrasive ; 3M ; 33194 ; 7000121057 ; 048011331942 ; Non-Woven Abrasive Plain Back Discs